9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
5
Run the cable so it is not resting against the intermediate shaft. It must not be taut either.
6
Secure the cable to the oil filler pipe with a new cable tie.
7
Cut off the loose end of the cable tie.
Stamping the campaign plate
Mark the campaign plate in box C3 after performing this procedure. Use a numeral "8" (Saab Special Tool P/N 02 97 713). If needed, order this special
tool directly from Kent-Moore at 1-800-345-2233.
Warranty/Time Information
See separate information.