9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
/l4-2.3l_turbo_(b235)_ho/Page-1166003.png)
1. Fit the sensor provisionally so that the cable runs along the water pipe. Change the O-ring if necessary and lubricate it with engine oil.
2. Spray the connector with Kontakt 61 (part no.30 04 520) and mount the connector to the holder. Plug in the connectors.
3. Secure the cables with the clip. Take care not to pinch or damage the cable with the clip.
