9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
/l4-2.3l_turbo_(b235)_ho/Page-2976008.png)
12. If the seat-belt has been taken off, re-attach it to the seat.
Slide the rails into the front keys.
Insert the front screws and run the seat forward.
Insert the rear screws.
Manually operated seat:
Check that the detents on the right and left sides have engaged.
Tighten the rear screws with a torque wrench.
Run the seat back and check that detents on the right and left sides have engaged. Tighten the front screws with a torque wrench.
Tightening torque: 24 Nm (18 lbf ft)
Check the SRS system and control module with diagnostic tools according to the following:
