9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
6.
Remove the thermo contact with pliers. Rotate the thermo contact while pulling it upwards from the A/C compressor.
7.
Remove any remaining silicone adhesive and clean the A/C compressor where the thermo contact had been located. Use a screwdriver or the like.
To fit
1.
Remove the transport protection from the new thermo contact. Apply a thin layer of 50 48 889 Silicone adhesive to the underside of the thermo
contact.