9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
Oxygen Sensor: Recalls
Campaign - Oxygen Sensor Cable Routing
MI No. 248-2245
PI No.
Date: September 2000
Distr.: US CA
9-3
Customer Satisfaction Campaign 841: Incorrect position, rear oxygen sensor cable
Background
The rear oxygen sensor cable on certain cars may be lying too close to the intermediate shaft, which means that the cable sheathing and insulation can be
damaged. This is caused by the cable being poorly secured.
Cars affected
Saab 9-3 M99 Viggen within VIN Serial Number, Ranges:
X7020001 - X7063257
Symptom description
Chafed cable
Owner Notification
As much as possible, owners of affected vehicles will be notified by Saab Cars USA, Inc. No VIN Status Lists will be issued for this campaign. Please
check your IRIS On-Line Recall & Service Campaign Inquiry for open campaigns.
Material
Insulating tape
79 71 880 Cable tie
46 60 502 Oxygen sensor (only if outer sheathing worn through)
Tools
Numeral 8 punch: 02 97 713
This tool can be ordered directly from Kent-Moore at 1-800-345-2233.
Warranty/time Information:
Submit warranty claims using the following information:
CHECK AND ADJUST
FAILED OBJECT: 11841
FAULT/REASON: 01
LOCATION: 0
WARRANTY TYPE: 02
REPAIR/ACTION: 05
LABOR OPERATION: 11841
TIME: 0.3
REPLACE THE HARNESS
FAILED OBJECT: 11841
FAULT/REASON: 01
LOCATION: 0
WARRANTY TYPE: 02
REPAIR/ACTION: 01
LABOR OPERATION: 11841 0.3 + 0.1 STRAIGHT TIME
Background