9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
/l4-2.3l_turbo_(b235)_ho/Page-541002.png)
The table describes the relationship between the selector lever position sensor's internal terminals A, B. C and PA, the pins in connector H10-1 and the
control module.
To ensure that the control module receives accurate information, it is important for the sensor to be correctly adjusted. Special tool 87 92 467 should
be used for adjusting the sensor.
Diagnostics
In the event of a fault in the selector lever position inputs, diagnostic trouble code P0705 will be generated and the transmission will go into
Limp-Home mode.
