9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
2
Fit the solenoid's two screws.
3
Fit the two parts of the selector lever housing together.
4
Rivet the parts of the selector lever housing together.
5
Connect the leads on the solenoid.
6
Secure the leads with a cable tie.
7
Fit the selector lever housing.
Stamping the campaign plate
After the car has been modified, mark the campaign plate in box A4 using a numeral "8" (Saab Special Tool P/N 02 97 713). If needed, order this special
too directly from Kent-Moore at 1-800-345-2233.
Warranty/Time information
See separate information.
Disclaimer