9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
Differential Case: Recalls
Campaign 157 38 - Differential Clutch Vent Hose
Bulletin Nbr: 473-2724
Date:...........Augusti 2009
Market: all
Bleeder hose, differential clutch, XWD
Service update 157 38
Cars in stock must be rectified before delivery.
Cars already delivered must be rectified in connection with a scheduled visit to the garage for service or repairs.
Cars affected
Saab 9-3 M08-09 with all-wheel drive (XWD) within the Vehicle Identification Number range 81100049-91022109.
Background
The filter in the differential clutch bleeder hose can be clogged by dirt which means that the ventilation is blocked. This may lead to water being mixed
with oil and cause clutch stick-slip. This then affects the function of the XWD, and may ultimately cause damage.
Parts required
13 326 736 Bleeder hose with filter and clips
For fitting the modification identity plate (not US/CA):
12 785 148 Modification identity plate
Checking the modification identity plate (not US/CA)
Before proceeding, check box B1 of the modification identity plate. From and including M04, the car's Warranty and Service Book contains the "Table
of Modifications". A modification identity plate must be fitted in accordance with the section "Fitting the modification identity plate" where local
directives require the marking of the car. If the box is not marked, continue as follows.
Procedure
1. Raise the car.
2. Clean around the hose connection (A) to the differential clutch.
3. Remove the clips with pipe (B) from the final drive gear housing.
4. Remove the hose from the nipple (C).