9-3 XWD (9440) L4-2.0L Turbo (2011)
/l4-2.0l_turbo/Page-95001.png)
Antenna: Diagram Information and Instructions
Lead Markings
Lead markings
The cables and leads are marked with a cable code consisting of three parts, e.g.:
P15-5 YE/GY 2.5
where:
The first part (P15-5) is the position number
The second part (YE/GY) is the colour code
The third part (2.5) is the cross-sectional area in mm2
Position number
Each lead is designated by a letter followed by an individual number.
The letter specifies the group to which the system belongs:
-
C Comfort Systems
-
D Diagnostics
-
E Engine Systems
-
G Gearbox Systems
-
I Instrumentation Systems
-
L Lighting Systems
-
P Power Supply Systems
-
Q Anti-Theft Alarm
-
S Safety Systems
-
T Telecom Systems
-
V View Systems
-
W Warning Systems
-
X Other systems (e.g. bus)
The number is unique except for:
-
15 = +15 voltage
-
30 = +30 voltage
-
31 = ground
-
54 = +54 voltage
Leads with the same letter and number, e.g. E110, E110-1, E110-2, etc., normally belong to the same function.
Colour code
The following colour codes are used in wiring diagrams. The colour codes can also be used in combination, e.g. RD/BU, GY/WH. The cables then have
at least two colour fields of each colour.
