9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-3992004.png)
2. Position the front corner of the bumper between the wing liner and the holder. Make sure the shell tongue lies between the wing liner and the
bumper shell holder.
3. Press the bumper shell in place at the retainer strip clips.
Cars with SPA: Run the connector through the rear light cluster recess and press the rubber grommet into place. Plug in the connector.
4. Certain cars: Fit bolts located under the lamp housing.
