9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-4381006.png)
IMPORTANT: Cables to hydraulic lines and position sensors must be refitted as they were earlier or there will be a risk of them being
damaged when the soft top and soft top cover are operated.
3. Put the hydraulic cylinder in mounting position. Fit the piston rod on the soft top mechanism fastening pin.
4. Put the cylinder in place and press in the lower fastening pin from inside. Press in the pin until the groove for the locking ring is visible.
