9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-1414020.png)
To fit
1. Attach the intermediate exhaust pipe to the turbocharger and the front exhaust manifold. Use a new gasket and coat the studs with 90 513 210
Universal paste. Fit all nuts.
IMPORTANT: The conical side of the nut should face the Center exhaust pipe.
2. Tighten the nuts as illustrated - first on the exhaust manifold and then on the turbocharger.
Tightening order 2a, 2b, 2c and 2d alternatingly on the turbocharger.
Tightening torque 30 Nm (22 ft. lbs.)
IMPORTANT: The surfaces should align with one another when the nuts are fitted. Check using a feeler gauge. If the surfaces are not
flat or the pipe is deformed, the Center exhaust pipe and/or exhaust manifold must be replaced.
