9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-3282002.png)
2. Fit the belt pulley and fit the circlip.
3. Put the shim in the driver and position the driver on the shaft. Tighten the screw.
4. Measure the play between the driver and the belt pulley using a feeler gauge. The play should be 0.5 ± 0.15 mm. Adjust the play if necessary but
changing the shim on the compressor shaft.
NOTE: The top of the feeler gauge must be angled to measure the play.
5. Fit the compressor's ground cable and locking plate on the compressor housing.
6. Fit A/C compressor, B207, A/C compressor, Z19 or A/C compressor, B284
