saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 11812 > < Procedures|Page 11810
Page 13
background image

11. Fit Upper spoiler, 5D.
12. Fit Tailgate trim
13. Check the function of the wiper and washer.

Main Wiring Harness

Main Wiring Harness

The spare parts net contains 6 extra connectors at the right A-pillar. These are connected differently depending on car variant. See the following:

-

If the car has an immobilizer switch on the clutch pedal:
Connect the 2-pin natural coloured sleeve connector with the 2-pin black pin connector.

-

If the car DOES NOT HAVE an immobilizer switch on the clutch pedal:
Connect the 2-pin natural coloured sleeve connector with the 2-pin blue pin connector.

-

If the car has either engine B284 or Z19 with automatic gearbox:
Connect the 3-pin natural coloured sleeve connector with the 3-pin grey pin connector.

-

If the car has either engine B284 or Z19 with manual gearbox:
Connect the 3-pin natural coloured sleeve connector with the 3-pin black pin connector.

Wiring Harness, Front Door

Procedures|Page 11812 > < Procedures|Page 11810