9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-3013048.png)
-
Detach the rubber gaiter from the boot lid (H) and the body (I).
7. Thread the wiring harness out from the cabin to the luggage compartment.
8. Thread the wiring harness out from the luggage compartment through the hole where the rubber grommet was located.
9. Remove the wiring harness.
To fit
1. Fit the wiring harness to the boot lid:
