9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-3412008.png)
9. Fit the dashboard nuts (B) on the passenger side.
10. Fit the dashboard's side cover (A).
11. Fit the A-pillar's trimon the passenger side.
12. Fit the ACC unit (216).
13. Fit the MIU frame.
14. Fit Floor console.
15. Connect the battery.
16. Turn on the ignition and check the airbag system and control module with the diagnostic tool as follows:
Connect the diagnostic tool to the data link connector under the dashboard. Delete any diagnostic trouble codes.
Turn the ignition OFF and then ON again. Wait at least 10 seconds with the ignition on. Check whether a diagnostic trouble code is shown:
If a diagnostic trouble code is shown:
Carry out fault diagnosis according to the instructions under respective trouble codes.
If a diagnostic trouble code is not shown:
Disconnect the diagnostic tool
17. Carry out Measures after disconnecting the battery.
