9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
-
Unplug the wiring harness connector (C) at the C-pillar and pull the wiring harness out via the luggage compartment.
To fit
1. Fit the door harness.
-
Route the new wiring harness the same way as the old one and secure it in the same way.
Take care that all grommets are firmly sealed.
-
Plug in the connectors to the respective component. If in doubt, consult the wiring diagrams/component lists of the system in question.
-
Plug the wiring harness into the connector (C) at the C-pillar.