9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-3208006.png)
3. Press in the catch (B) and pull the control module (C) up until it is loose.
4. Unplug the connector (D).
To fit
1. Plug in the connector (D).
2. Fit the control module (C) in the groove until the catch (B) engages.
3. Fit the cover (A).
4. Carry out Procedure after control module replacement.
CV
Control Module, Tyre Pressure (753), CV
To remove
1. Carry out Procedure before control module removal.
2. Open boot lid.
3. Remove the hatch (A) in the trim. Carefully lower the trim (B).
