9-3 XWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-2500006.png)
4. Push in the rest of the shaft until the circlip clicks in.
5. Fit the ball joint to the steering swivel member and tighten.
Tightening torque 50 Nm (37 ft. lbs.)
Warning: Make sure the steering swivel pin is visible above the steering swivel member before fitting the bolt.
6. Fit the brake hose in the mounting on the steering swivel member and fit the clip as well as the two mountings for the ABS lead.
7. Fit the wheel
8. Fill the gearbox with oil to the correct level. See Refilling with gearbox oil.
Z19: Fit the lower engine cover.
