9-5 (9600) L4-2.3L Turbo (2007)
Rear Bumper Reinforcement: Service and Repair
Rear Bumper Shell/Cellular Block, 5D
Rear Bumper Shell/Cellular Block, 5D
Removing
1. Remove Rear bumper, 5D. Place it on a well protected work bench.
2. Remove Upper rear protective shell, 5D.
3. Remove the cellular blocks.
4. Cars with SPA: Remove the connector from the holder.
5. Detach the bumper rail from the protective shell by releasing the retaining clips.
6. Remove the cellular blocks from the protective shell (wedged into the protective shell's retaining wedges).