9-5 (9600) L4-2.3L Turbo (2007)
6. Lift off the brake disc.
To fit
1. Wash the new brake disc and check that its surface in contact with the hub is free from rust, burs and the like.
2. When fitting the brake disc, check that the hub's surface in contact with it is not rusty or dirty.
Fit the brake disc on the hub, apply Loctite 242 to the locking screws of the brake disc and tighten them with a torque wrench.
Tightening torque: 4 Nm (3 ft. lbs.)