9-5 (9600) L4-2.3L Turbo (2007)
8. V6 diesel engine: Fit the turbocharger heat shield.
9. Fit the battery and the battery cover.
Master cylinder, RHD
To remove
1. V6 TiD: Remove the upper intake manifold.
2. V6 TiD: Remove the upper engine cover.
3. Drain the brake fluid reservoir. Use 88 19 096 Bleeding equipment. Then connect the brake bleeder to the bleed nipple on each front brake caliper
and draw out the remaining brake fluid.
If changing the master cylinder: Remove the brake fluid reservoir.
4. Disconnect the brake pipes and plug them.