saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ABOUT US
Removal of Pistons (In Car)|Page 2931 > < Removal of Pistons (In Car)|Page 2929

9-5 (9600) L4-2.3L Turbo (2007)

Page 1
background image

Connecting Rod: Service and Repair
Fitting Piston Rings In A New Or Rebored Cylinder

Piston Rings

Fitting in a new or rebored cylinder

1. Push the piston rings down into the cylinder one by one, using a piston to position them correctly.
2. Measure the ring gap with a feeler gauge, see illustration. If necessary, the gap can be increased with a special file. For measurement information,

see Pistons.

Removal of Pistons (In Car)|Page 2931 > < Removal of Pistons (In Car)|Page 2929