9-5 (9600) L4-2.3L Turbo (2007)
/l4-2.3l_turbo/Page-917005.png)
8. Moderately tighten the screws to the engine block. Tighten the three screws to the gearbox and the the oil sump's other screws. Finish by tightening
the screws in the reinforcements. Replace the cover.
Tightening torque, oil sump 22 Nm (16 ft. lbs.)
Tightening torques, gearbox screws 47 Nm (35 ft. lbs.)
9. Connect the crankcase breather hose.
10. Clean the joints, grease the turbocharger studs with Molycote 1000, part No. 3020 971 and replace the exhaust pipe.
11. Check that the oil plug is tightened and lower the car to the floor.
12. Tighten the other exhaust pipe nuts.
Tightening torque: 25 Nm (18 ft. lbs.)
