9-5 (9600) L4-2.3L Turbo (2007)
7. When the new chain has been fed forward to such an extent that only a few links still remain on the inlet side's camshaft sprocket, cover the area
round the chain with a cloth once again. Secure the chain with a cable tie, and remove the chain link and the old chain.
8. Connect the ends of the new chain together with a chain link and remove the cable tie and cloth. Pull the chain round until the link is midway
between the shanks of the chain support.
9. Cover the opening with a cloth, remove the chain link and fit a new chain lock.
Check that the inserts marked 2 are mounted in the tool. Then place the chain link's plate in the tool and align it over the link on the chain.
Press the plate in place with a force of 10 Nm (7 ft. lbs.).