9-5 (9600) L4-2.3L Turbo (2007)
/l4-2.3l_turbo/Page-947002.png)
7. Remove guide pins from timing cover by cutting an internal thread with a 3/8 inch UNC screw tap and pull them out with sliding hammer 83 90
270.
8. Remove all bolts from timing cover.
9. Pull the cover loose at the bottom first.
10. Then lift the cover out/down so that the gasket is not damaged on the cylinder head.
To Fit
1. Thoroughly clean away all the sealant residue on all surfaces. Wash with benzine.
2. Apply Loctite 518 in a 1 mm thick bead onto sealing surfaces.
3. Fit the timing cover by carefully twisting it in place. Tighten retaining bolts loosely and knock in guide pins.
4. Torque tighten the timing cover.
Tightening torque 22 Nm (16 ft. lbs.).
