9-5 (9600) L4-2.3L Turbo (2007)
23.
Plug in the stepping motor connector.
24.
Start the engine.
25.
Wait to see whether the ACC system calibrates itself. Otherwise, calibrate the ACC system by simultaneously depressing the buttons.
26.
Wait until system calibration is complete (approx. 30 seconds) and then set temperature 21 on both sides and select AUTO. Wait until the system
has stabilised (approx. 30 seconds) and switch off the engine. Clear any diagnostic trouble codes.
27.
Fit the brake pedal strut.
28.
Attach the data link connector, lamp and lower panel.