9-5 (9600) L4-2.3L Turbo (2007)
-
Unplug the connector (B) from the rear lamp.
3. Replace the bulb socket:
-
Remove the bulb socket (A).
-
Transfer the bulbs to the new bulb socket.
-
Dry the moisture from the rear lamp. Use compressed air, a hot-air gun or similar.
NOTE:
Take care not to damage the rear lamp if a hot air gun is used for example.
-
Fit the new bulb socket (A).
4. Fit the rear lamp:
-
Plug in the connector (A).
-
Press the lamp into the clip (B).
-
Fit the light cluster in place and fit the screws (C).
5. Close the tailgate.
Warranty/Time Information