9-5 (9600) L4-2.3L Turbo (2007)
Important: Exercise the utmost care to ensure that the belt tensioner does not break at its end position!
7. Remove the drive belt from the pulleys.
To Fit
1. Fit the drive belt round the pulleys, check its position on all the pulleys and tension it.
2. Fit the right-hand engine mounting with yoke.
Tightening torque: 50 Nm (36 ft. lbs.).
3. Fit the rubber gaiter.
4. Remove the wedge and attach the pipe to the subframe.
5. Lower the car to the floor.