9-5 (9600) L4-2.3L Turbo (2007)
/l4-2.3l_turbo/Page-1158002.png)
To Fit
Important: The oxygen sensor is sensitive to impact and jolting and must be handled with care. It is important that the connections between the oxygen
sensor and nipple are gas-tight.
1. Coat the oxygen sensor threads with Molycote 1000 (30 20 971) to prevent binding.
2. Fit the oxygen sensor.
Tightening torque 55 Nm (41 ft. lbs.)
3. Lead the cable as far up as it will go. Lower the car.
Important: Watch out for sharp edges, warm components etc.
4. Draw out the cable and plug in the connector.
Important: Chemicals such as contact spray and grease must not come into contact with the oxygen sensor connectors.
