9-5 (9600) L4-2.3L Turbo (2007)
/l4-2.3l_turbo/Page-2579003.png)
2. Fit the airbag into the steering wheel.
3. Connect the battery.
4. Switch on the ignition and check the airbag system and control module as follows:
Connect the diagnostic tool to the diagnostic socket under the dashboard. Delete any trouble codes.
Switch off the ignition and switch it on again. Wait at least 10 minutes with the ignition switched on.
Check whether a diagnostic trouble code (DTC) is displayed:
If a diagnostic trouble code is shown:
Carry out fault diagnosis in accordance with the directions given for each DTC.
If no diagnostic trouble code is shown:
Disconnect the diagnostic tool.
5. Carry out Measures after disconnecting the battery.
