9-5 (9600) L4-2.3L Turbo (2007)
Technical Service Bulletin # 644-2652
Date: 070301
Campaign 154 53 - Steering Gear Banjo Fitting Seals
MODIFICATION INSTRUCTION
Bulletin Nbr: 644-2652
Date:...........Mars 2007
Market: all
Replacing the sealing rings on the steering gear
Customer Satisfaction Program 154 53
Cars in stock must be rectified before delivery.
A personal communication must be sent to the owners of cars already delivered requesting them to get in touch with the nearest Saab garage as soon as
possible to have the fault rectified.
Cars affected
Saab 9-5 M06-M07 within Vehicle Identification Number range 63520874 - 73507946.
Background
The sealing surface on the sealing rings for the banjo connections on the steering gear may have been positioned incorrectly. This could mean that the
joint loses clamping force, resulting in the leakage of power steering fluid.
Symptom description
Leakage of power steering fluid from the banjo connections on the steering gear.
Parts required
48 39 932 Sealing ring (2 per car)
49 05 253 Sealing ring (2 per car)
93 160 548 Power steering fluid (sufficient for 10-13 cars)
55 187 592 Gasket (diesel only)
For fitting the modification identity plate (not US/CA):
12 785 148 Modification identity plate
93 160 907 Cleaning agent Motip Dupli, aerosol 400 ml (sufficient for 50-100 cars).
Checking the modification identity plate (not US/CA)
Before proceeding, check box B1 of the modification identity plate. From and including M04, the car's Warranty and Service Book contains the "Table
of Modifications". A modification identity plate must be fitted in accordance with the section "Fitting the modification identity plate" where local
directives require the marking of the car. If the box is not marked, continue as follows.
Warranty/Time Information
See separate information.
Fault diagnosis procedure is not available.
Disclaimer
Procedure
Procedure