9-5 (9600) L4-2.3L Turbo (2007)
-
Fit the delivery line (A), use new sealing rings (48 39 932).
Tightening torque 30 Nm (22 lbf ft)
-
Remove the return line (B) from the power steering. Remove the old sealing rings.
-
Fit the return line (B), use new sealing rings (49 05 253)
Tightening torque 30 Nm (22 lbf ft)
-
Wipe clean any power steering fluid from the banjo connections.
-
Remove the receptacle.
12. RHD: Fit the engine pad (A).
Tightening torque 26 Nm (19 lbf ft)
13. Fit the subframe:
-
Raise the subframe with the column jack and insert the screws (C, B, A).
-
Tighten the screws (C, B). Check that the subframe is positioned against the body in accordance with the markings
Tightening torque 100 Nm +45 degrees (74 lbf ft +45 degrees)