saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Main Components|Page 9621 > < Main Components|Page 9619
Page 41
background image

^

Fuel consumed since start, unit ml (bus information from engine control module).

^

Coolant temperature, unit degree C (bus information from engine control module).

The calculated value is updated every 16 seconds. To avoid rapid changes in the value, no update is carried out when starting from cold or if car speed is
below 5 km/h.

When the function is reset, "x x x km" (miles) appears on the SID unit display. The distance then shown (DTE) is calculated internally using the value of 
1 1/10 km.

FUEL (average fuel consumption)

The average fuel consumption is calculated using the following information:

^

Fuel consumed since start, unit ml (bus information from engine control module).

^

Odometer reading, unit km, miles (bus information from MIU).

The display range is 0 to 99.9 litres/100 km, MPG Imp or MPG.

The calculated value is updated every 4 seconds from the last manual memory reset. Every 500 km, both the distance and the fuel consumption are
divided by 2 so that the value is not influenced too much by "old" consumption figures.

Main Components|Page 9621 > < Main Components|Page 9619