9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
/l4-2.3l_turbo_(2.3_t)/Page-2788004.png)
SID Module-Lighting
Readings, Control Module Connections, Xenon Headlamps
Scope
This section contains the readings and instructions for measuring voltage levels on the SID unit.
Remember
^
Note the test conditions and use common sense when assessing the test result.
^
First check that the control module has a power supply and is grounded.
^
Then check all sensor inputs and signals from other systems.
^
Lastly, check the control module outputs. Remember, the test values do not say anything about whether or not the actuator is in working order.
^
If a reading is incorrect, consult the wiring diagram to trace the leads, connectors or components which should be checked more thoroughly.
^
The specified test readings refer to those obtained with a calibrated Fluke 88/97.
^
The test readings show the signal's pulse ratio and pulse width. A test instrument with pulse ratio and pulse width measurement must be used. The
sign indicates a positive trigger pulse, TRIG+.
Control module connection
