9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
9. Detach the brake pipes between the ESP unit and master brake cylinder.
10. Disconnect the brake pipes from the ESP unit.
11. Remove the ESP unit.
To Fit
1. Make sure the rubber plug is inserted in the ESP unit's bracket on the structural member.
2. Fit the ESP unit.
Tightening torque: 24 Nm (18 ft. lbs.)
3. Fit the brake pipes that run to the wheel cylinders. Thread the nipples by hand.
4. Tighten the nipples with a brake pipe wrench.
Tightening torque: 15 Nm (11 ft. lbs.)