9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
/l4-2.3l_turbo_(2.3_t)/Page-1034003.png)
1. Check and clean the sealing surfaces. Grease the rubber seal lightly with non acidic Vaseline.
2. When fitting the thermostat, ensure that the vent hole is at the top (thermostat marking "TOP").
3. Fit the thermostat housing.
Tightening torque: 22 Nm (16.2 ft. lbs.).
4. Fit the ground cable and the coolant pipe bracket. Apply acid-free Vaseline to both sides of the ground connection.
