saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ABOUT US
A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 8057 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 8055

9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)

Page 20
background image

Tightening torque 1.4 Nm (1 lbf-ft)

Note

Be careful when the heat exchanger is pushed into the heat exchanger housing as the space between the heat exchanger and the upper cam disc
is limited.

4.

Fit the new cover with the 4 screws at the rear air distribution valve. Start with the upper rear screw, then with the lower rear screw.

Tightening torque 1.4 Nm (1 lbf-ft)

Note

Make sure that the air shield on the heat exchanger housing is set against the seal (certain models) and the guide inside the evaporator casing
when the heat exchanger housing is fitted.

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 8057 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 8055