9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
/l4-2.3l_turbo_(2.3_t)/Page-2372004.png)
The new shaft is coded to fit in only one position in the stepping motor.
20.
Fit the stepping motor for the air mixing damper.
21.
Plug in the stepping motor connector.
22.
Start the engine.
23.
Wait to see whether the ACC system calibrates itself. Otherwise, calibrate the ACC system by simultaneously depressing the buttons.
24.
Wait until system calibration is complete (approx. 30 seconds) and then set temperature 21 on both sides and select AUTO. Wait until the system
has stabilized (approx. 30 seconds) and switch off the engine. Clear any diagnostic trouble codes.
25.
Fit the glove box in accordance with WIS - Body - Interior equipment - Adjustment/Replacement - Glove box.
26.
Clear any diagnostic trouble codes.
Warranty/Time Information
In the case of customer complaint and if the car is within the warranty period, use the following information to fill out the claim:
Failed Object:
85434
Fault/Reason code:
71
Location code:
09 (US=4)
Warranty Type (US):
01
Repair/Action code:
01
Labor Operation (US):
8543404
Labor Operation (CA): D0580
Time:
0.5 hr
Fault diagnosis procedure is not available.
