9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
/l4-2.3l_turbo_(2.3_t)/Page-1467002.png)
To fit
1. Connect the valve to the hose.
2. Connect the hose.
3. Refit the washer.
4. Fit the cover over the valve, making sure the cables end up in the washer opening.
IMPORTANT: Take care with the foam rubber filter so that it is not damaged or incorrectly fitted.
5. Spray with Kontakt 61 and plug in the connector.
6. Fit the front cover.
7. Fit the purge device to the filler pipe.
8. Spray with Kontakt 61 and plug in the connector to the purge device.
9. Secure the cables with a cable tie.
