9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
/l4-2.3l_turbo_(2.3_t)/Page-1528004.png)
Tightening torque: 8 Nm (6 lbf ft)
2. Fit the pressure regulator vacuum hose.
3. Screw in the two rail retaining screws.
4. Fit the wiring to the fuel rail.
5. Fit the following connectors: ignition discharge module, injectors, manifold absolute pressure sensor, mass air flow sensor and turbo pressure
sensor.
IMPORTANT: Make sure the connectors are fitted to the correct injectors as indicated on the wiring. Spray all the connectors with Kontakt 61
contact cleaner (part no. 30 04 520) before plugging them in.
6. Fit the wiring holder.
7. Screw in the rear screw.
8. Tighten the front screw.
9. Connect the hose and fit the hose clips.
