9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
/l4-2.3l_turbo_(2.3_t)/Page-1655001.png)
Ignition Control Module: Service and Repair
Ignition Discharge Module
IMPORTANT: Before replacing the ignition discharge module, carry out Extended ignition discharge module diagnose for Trionic 7.
To remove
1. Unplug the 10-pin ignition discharge module connector.
2. Remove the 4 screws.
3. Lift up the module.
To fit
1. Apply Krytox (part no. 30 19 312) to the rubber seals and fit the ignition discharge module.
2. Fit the 4 screws.
Tightening torque 11 Nm (8.1 lbf ft)
