9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
/l4-2.3l_turbo_(2.3_t)/Page-2628010.png)
With the ignition key in the ON position, the control module receives +15 power via fuse 28 to pin 51. The control module is intended for use with a
power supply between 9 and 16 V.
Grounding
The control module is connected to ground via pin 52 and the three retaining screws. No ground cables from other systems may be connected to the
retaining screws as this could cause malfunctioning of the airbag system.
A poor ground connection will not cause a diagnostic trouble code to be generated. When connection to ground is restored after having been interrupted,
it corresponds to power turn-on and the control module again runs through the on-board diagnostics program. The airbag warning lamp will then lights
up for 3-4 seconds.
Connector
