9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
Repairs and Inspections Required After a Collision: Service and Repair
Check Safety-Related Components When Repairing Cars Damaged In A Collision
Check Safety-related Components When Repairing Cars Damaged In A Collision
Cars with triggered seat-belt tensioner and/or side airbag
When repairing a car with only a triggered seat-belt tensioner and/or side airbag, the components must be replaced as follows.
The control module can be used a maximum of three times for activating a seat-belt tensioner and/or side airbag.
Check and if necessary repair or replace the wiring harness for the side impact sensor, side airbag and seat-belt tensioner
Cars with a triggered seat-belt tensioner
When repairing a car with a triggered seat-belt tensioner, the following components must always be changed:
-
all front-seat seat belts with seat-belt tensioner (1)
-
all rear-seat seat belts in use when the collision occurred (2).