9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
6. Fit the mounting for the wheel sensor cable and brake pipe.
Tightening torque: 24 Nm (18 ft. lbs.).
7. Fit the wheel sensor cable to the mounting.
8. Plug in the connector to the wheel sensor.
9. Fit the mounting for the handbrake cable.
Tightening torque: 8 Nm (6 ft. lbs.).
10. Fit the air separator.
11. Fit the wheel. Tightening torques:
aluminium rim 110 Nm (81 ft. lbs.)
pressed steel rim 50 Nm +2x 90°, max. 110 Nm (37 ft. lbs. +2x 90°, max. 81 ft. lbs.)
12. Lower the car to the floor.
13. Depress the brake pedal to press out the pistons in the brake calipers.