9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
Shifter M/T: Service and Repair
Gear Lever Removal And Installation
Gear Lever
To Remove
1. Remove the gear lever housing as described in.
2. Remove the lock plate holder.
3. Remove the spring securing the lock plate.
4. Use a screwdriver to disengage the pawl which is controlled from the ignition switch. Lift up the lock plate together with its plastic bracket.
5. Remove the deflection limiter.
6. Set the gear lever to reverse and undo the screw securing the selector rod to the gear lever.
7. Remove the gear lever and ball socket by carefully pressing in the three tabs on the socket using a screwdriver.