9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
/l4-2.3l_turbo_(2.3_t)/Page-3869009.png)
25. Crank with a lock handle so that the wire cuts through the glue joint. Move the plastic guard as the wire moves. Move the whimple little by little to
obtain a good angle. A transverse angle with the wire cuts best. If necessary, use the second whimple as support. If the wire seems to be coming
off, wait 10-15 seconds so that the wire can work itself into the glue joint.
26. When the wire begins to cut the upper part of the windscreen, fit the protective tool with suction cups between the cutting wire and metal roof to
protect the interior equipment. Move the whimple and protective tool little by little as the windscreen loosens.
27. Fit the lifting handle on the outside of the windscreen.
28. With the assistance of a co-worker, lift the windscreen away.
To fit
IMPORTANT: Betaseal X 2500 cures in 1 hour at 23 degrees C and 50% relative humidity. To avoid the glass from coming loose or its
position changing during the curing time, the car must not be subjected to jolts or blows. The doors, tailgate and bonnet must not be shut. The
car must not be rocked or rolled. Neither must the glass be pressed in while the adhesive is curing.
Use 32 025 039 Adhesive kit, window glass for bonding windows. To avoid confusion between the cleaner and primer, the tops of the tubes are different
colors:
