saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Inner Tailgate Handle, 5D|Page 8526 > < Inner Tailgate Handle, 5D|Page 8524
Page 7
background image

5. Fit the lock rod and plug in the connector. Fit the connector into the holder.
6. Check the rubber seal and fit the light cluster to the tailgate. Fit the number plate if it was removed.
7. Plug in the connectors.
8. Fit the inner trim by inserting the clip at the door pull and fastening with the clips. Screw in the two door pull screws.

Inner Tailgate Handle, 5D|Page 8526 > < Inner Tailgate Handle, 5D|Page 8524