9-5 (9600) L4-2.3L Turbo (B235) (2001)
/l4-2.3l_turbo_(b235)/Page-2547006.png)
15. Bolt the power steering fluid pipe's rear clamp and front bracket to the subframe and tighten the bolts. The rear clamp must be fitted in such a way
that the pipe is located as far away from the drive shaft as possible.
16. Fit the ball joint to the steering swivel member.
Tightening torque 65 Nm (48 ft. lbs.)
17. Fit the anti-roll bar support to the MacPherson strut.
Tightening torque 92 Nm (68 ft. lbs.)
