9-5 (9600) L4-2.3L Turbo (B235) (2001)
/l4-2.3l_turbo_(b235)/Page-678003.png)
8. Drain the engine oil.
9. Disconnect the crankcase breather hose from the oil sump.
10. Remove the bolts on the oil sump and lower the sump.
To fit
1. If the sump is changed, transfer the splash guard and pipe to the new sump. Use new O-rings.
2. Ensure the oil sump contains no dirt or contaminants. Clean the sealing surfaces on the engine and sump with a gasket scraper and suitable cleaner.
3. Apply an even, 2 mm thick bead of flange sealant, part no. 93 21 795, to the sealing surfaces of the oil sump.
4. Check that the pipe to the oil adapter is securely in place and that it positioned correctly in the oil sump. Change the O-rings if necessary.
